Step 4: Enable the rest interfaces with no shut Step 2: Configure the external interface vlan (connected to Internet)ĪSA5505(config-if)# ip address 200.200.200.1 255.255.255.0ĪSA5505(config-if)# switchport access vlan 2 Notice from the diagram that port Ethernet0/0 connects to the Internet, and ports Ethernet0/1 to 7 connect to internal hosts (PC computers etc). The diagram below illustrates the network topology for the configuration setup that we will describe. Let’s see the basic configuration setup of the most important steps that you need to configure. That is, you can not configure the physical ports as Layer 3 ports, rather you have to create interface Vlans and assign the Layer 2 interfaces in each VLAN.īy default, interface Ethernet0/0 is assigned to VLAN 2 and its the outside interface (the one which connects to the Internet), and the other 7 interfaces (Ethernet0/1 to 0/7) are assigned by default to VLAN 1 and are used for connecting to the internal network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |